The time limit for inspection of manual hoists is 01 year

02:55, 11/07/2024

This is a notable content stipulated in Circular 128/2016/TT-BQP issued by the Ministry of National Defense on August 30, 2016.

Circular 128 specifically stipulates the inspection period for the lifting winch as follows:

- The periodic inspection period for lifting winches is 01 year (with the safety brake tested every 06 months). For lifting winches used for over 15 years, the periodic inspection period is 06 months.- In cases where the manufacturer or the facility's requirements demand shorter inspection periods, the manufacturer's or facility's recommendations should be followed.- When shortening the inspection period, the inspector must state the reasons in the inspection report.- When the inspection period is stipulated in national technical regulations, follow the provisions of those regulations.- Cases requiring unusual inspections are carried out according to Section 4.5 of the Procedure issued together with Circular 128.

See details in Circular 128/2016/TT-BQP effective from October 15, 2016.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email [email protected]