Steps for Safety Inspection of Nitrogen Stations

02:27, 11/07/2024

Circular 123/2016/TT-BQP was issued by the Ministry of National Defense on August 30, 2016, specifying the steps for safety inspection of Nitrogen stations.

Circular 123 stipulates that during the technical safety inspection of a nitrogen station, the organization conducting the inspection must perform the following steps sequentially:

- Step 1. Inspection preparation;- Step 2. Review of technical documentation;- Step 3. External and internal inspection;- Step 4. Technical testing;- Step 5. Operational testing;- Step 6. Processing of inspection results.

Note:

- Subsequent inspection steps can only be conducted if the results of the preceding step meet the requirements.- All inspection results of each step must be fully recorded in the field notes and retained at the inspection organization.

See details in Circular 123/2016/TT-BQP, effective from October 15, 2016.

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email [email protected]