Steps for Inspection of Launching Hoists

02:59, 11/07/2024

Circular 128/2016/TT-BQP was issued by the Ministry of National Defense on August 30, 2016, specifying the detailed steps for hoist testing of rocket launchers.

Accordingly, Circular 128 stipulates that technical safety inspection of lifting hoists must be carried out sequentially according to the following steps:

- Step 1: Inspect documents and records;- Step 2: External technical inspection;- Step 3: Technical inspection - No-load test;- Step 4: Load test policies - Testing methods;- Step 5: Process inspection results.

Note:

Subsequent inspection steps can only be performed if the results of the previous step meet the requirements. All results of each step must be fully recorded in the field log and fully stored at the inspection organization.

See details in Circular 128/2016/TT-BQP, which took effect from October 15, 2016.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email [email protected]