Promulgating the Periodic Inspection Cycle for Bridge Cranes and Gantry Cranes

02:59, 11/07/2024

Circular 52/2016/TT-BLDTBXH has been signed and promulgated by the Ministry of Labor, War Invalids and Social Affairs, issuing the National Technical Regulation on Occupational Safety for Bridge Cranes and Portal Cranes.

According to the provisions of Circular 52/2016/TT-BLDTBXH, gantry cranes and mobile cranes must undergo initial inspection before being put into use, periodic inspections during use, or extraordinary inspections. The periodic inspection for gantry cranes and mobile cranes is carried out as follows:

- The inspection cycle is every 3 years for gantry cranes and mobile cranes operating under normal working conditions.- The inspection cycle is every 1 year for gantry cranes and mobile cranes that have been in use for over 12 years.- The inspection period can be shortened if required by the manufacturer or the unit using the equipment.- The organization for occupational safety technical inspection can shorten the inspection period but must specify the reasons in the inspection report regarding the technical issues ensuring safety of the gantry cranes and mobile cranes during use.

See regulations on inspection and examination at Circular 52/2016/TT-BLDTBXH effective from August 1, 2017.

- Thanh Lam -

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email [email protected]